Production description
ERW219 Tube mill/pipe mill/welded pipe production/Pipe making machine is used to Produce steel pipes of 89mm~219mm in OD and 2.0mm~8.0mm in wall thickness, as well as corresponding square and rerctangular pipe.
Application：GI,Construction,Automotive,General Mechanical tubing,Furniture, Agriculture,Chemistry,Oil,Gas, Conduit,Contructure.
|
Product |
ERW219mm Tube Mill |
|
Applicable Material |
HR/CR,Low Carbon Steel Strip Coil ,Q235,S235,Gi Strips. σb≤550Mpa，σs≤235MPa |
|
Pipe cutting Length |
60.~12.0m |
|
Length Tolerance |
±1.5mm |
|
Surface |
With Zinc Coating or without |
|
Speed |
Max. Speed : ≤120m/min (can customized according to customer's requirements) |
|
Others |
All the pipe is high frequency welded |
|
Material of roller |
Cr12 |
|
Squeeze roll |
H13 |
|
Scope of Pipe Making Machine |
Hydraulic double-Mandrel un-coiler |
|
All auxiliary equipment and accessories, such as uncoiler, motor, bearing, cutting saw, roller, hf, etc., All are top brands. The quality can be guaranteed. |
|
Process Flow
Steel Coil → Double-arm Uncoiler → Shear and End Cutting & Welding → Coil Accumulator → Forming (Flattening Unit + Main Driving Unit + Forming Unit + Guide Unit + High Frequency Induction Welding Unit + Squeeze Roller) → Deburring → Water Cooling → Sizing & Straightening → Flying Saw Cutting → Pipe Conveyor → Packaging → Warehouse Storage
Advantages
1.High Precision
2.High Production efficiency,Line speed can be up to 120m/min
3.High Strength,The machine works stably at a high speed, which improves product quality.
4.High Good product rate, reach to 96.5%
5.Low wastage, Low unit wastage and low production cost.
Specification
|
Raw Material |
Coil Material |
Low Carbon Steel, Q235, Q195 |
|
Width |
280mm-690mm |
|
|
Thickness: |
2.0mm-8.0mm |
|
|
Coil ID |
Φ580-φ630mm |
|
|
Coil OD |
Max φ2000mm |
|
|
Coil Weight |
15Tons |
|
|
Production Capacity |
Round Pipe |
89mm - 219mm |
|
Square & Rectangular Pipe |
70*70mm - 170*170mm |
|
|
Wall Thickness |
2.0- 8.0mm (Round Pipe) |
|
|
Speed |
Max. 50m/min |
|
|
Pipe Length |
5m – 12m |
|
|
Workshop Condition |
Dynamic Power |
380V, 3-phase, 50Hz (depends on local facilities) |
|
Control Power |
220V, single-phase, 50 Hz |
|
|
Size of the whole line |
100m X 9m （L*W） |
|
Product Range
| - Material | HRC, CRC, Galvanized Steel |
| - Type | Round, Square & Rectangular pipe |
| - Round Tube | 89mm – 219mm |
| - Square Tube | 70 x 70 – 200 x 200mm |
| - Rectangular Tube | 70 x 80 – 200 x 180mm |
| - Wall thickness | 2.0 mm – 8.0 mm |
| - Pipe length | 6.0m - 12.0m |
| - Line Speed | Max. 50 m/min |
| - Welding Method | GGP600kW Solid State High Frequency Welding |
| - Forming Method | Conventional Forming; FFX Forming |
| - Cutting Type | Friction Saw or Orbital Cutting(Cold Saw) |
| - Installation Electric Capacity | Approx:1100Kw |
We always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content line from us.
For more information, please send us inquiry.we are tube mill manufacturer and tube mill supplier ,you can know it.
Company Introduction
Hebei Tubo Machinery Co.,LTD is a high-tech enterprise registered in Shijiazhuang City. Hebei Province. It specialized in Developing and Manufacturing for the complete set of equipments and related technical service of High Frequency Welded Pipe Production Line and Large-size Square Tube Cold Forming Line .
Hebei Tubo Machinery Co.,LTD With more than 130 sets all types of CNC machining equipment, Hebei Tubo Machinery Co.,Ltd., manufactures and exported to over 15 countries of welded tube/pipe mill, cold roll forming machine and slitting line, as well as auxiliary equipment for more than 15 years.
TUBO Machinery, as a partner of users, provides not only high precision machine products, but also technical support everywhere & anytime.
Our Workshop
Our Certificate
Field Visits
Our advantage
1)We have our own CNC Machining Center, We can control cost and deliverly time.
2) More than 15 years R&D and Manufacturer Experience.
3) We can customized according to customer’s requirements.
4) We have professional researching, designing, processing, testing and after-sale service teams.
5) We can Strict quality control in raw material, processing accuracy,heat treatment,assembling accuracy,standard components and so on. Strict inspection for equipment before delivery.
Packing&shipping
1. Q : Are you manufacturer ?
A: Yes, We are manufacturer . More than 15 years R&D and Manufacturing Experience. We use more than 130 CNC machining equipments to guarantee our products perfect.
2. Q: What payment terms do you accept?
A: We are flexible on payment terms, please contact us for details.
3. Q:What information do you need to supply a quotation?
A: 1. Maximum Yield Strength of the material,
2.All pipe sizes needed (in mm),
3. Wall thickness (min-max)
4. Q: What is your advantages?
A: 1. Advanced mould share-use technology (FFX, Direct Forming Square). It saves a lot of invest amount.
2. Latest quick change technology to increase the output and reduce labor intensity.
3. More than 15 years R&D and Manufacturing Experience.
4. 130 CNC machining equipments to guarantee our products perfect.
5. Customized According to Customer Requirements.
5. Q: Do you have after sales support?
A: Yes,we have. We have a 10-person -professional and strong installation team.
6.Q: How about your service?
A:(1) One year’s warranty.
(2) Providing spare parts for life time at cost price.
(3) Providing Video technical support, Field installation, commissioning and training, online support, Engineers available to service machinery overseas.
(4) Provide technical service for facility reforming, refurbishment.
Write your message here and send it to us