During use, we must strictly follow the operating procedures in the instruction manual, not to allow the equipment to be overloaded and used. Before the welded pipe equipment is put into production, we must check whether the various parts can work normally.

In the production process of welded pipe equipment, the temperature of the equipment and the stability of the production conditions must be ensured. If there is a failure, it is necessary to stop production in time and check which parts are wrong to avoid greater losses. The main failures include unstable operation, machine wear, and abnormal noise during operation. If there is a problem, it should be checked in time.

If we use welded pipe equipment in winter or a cold area, we need to stop for a while and rest for a while, so that the oil temperature of the welded pipe equipment will rise, and we can start working when the hydraulic pump station is able to operate flexibly. .

The main points of attention for winter equipment are as follows: 

1.Anti-freezing of mechanical parts (to prevent icing of the transmission part).

2.The motor is moisture-proof and leak-proof (check the motor seal).

3.Check the wearing parts and replace the damaged parts (check the gear bearing to see if the bearing is short of oil, whether there is running the inner ring or the outer ring, whether the bearing needs to be replaced).

4.Anti-rust (brush anti-rust paint).

Hebei Tubo Machinery Co.,Ltd., manufactures and exported to over 30 countries of welded pipe mill,ERW Tube Mill,Welded tube Mill,Welded Pipe Machine,Structural pipe machine, Carbon Steel Tubes,Carbon Steel Square Pipe, Carbon Steel Rectangular Pipe,Galvanize steel rectangular pipes, Directly Forming Square Tube Mill, Cut to length line ,cold roll forming machine and slitting line, as well as auxiliary equipment for more than 15 years.

TUBO Machinery, as a partner of users, provides not only high precision machine products, but also technical support everywhere & anytime.

We professional in Pipe Making Machine for more than 15 years experience.
We can help factory of steel pipe solve all difficult.